MX3 Pro Hydration Testing System
The MX3 Hydration Testing System uses a single device to run two different tests in real-time that tell you how much fluid to drink and what kind of fluid will best replace the electrolytes you lose during exercise.
The sweat test measures sodium levels, so you can replace lost electrolytes and customize your hydration strategy with the right fluids. With MX3, you can test, track and hydrate effectively to optimize your performance and reduce injury.
A great option for mine sites, remote locations and workplaces where maintaining hydration is a primary focus.
Use the MX3 LAB anytime, anywhere. Simply take a quick saliva or sweat sample on the field or in the locker room.
MX3 is scientifically proven to measure biomarkers from saliva as accurately as a laboratory osmometer.
The LAB can be used over and over by one person or entire teams. Just replace the disposable test strip after each measurement.
Your hydration level is recorded within seconds of taking a saliva measurement and results immediately upload to your app.
Test strips load easily into the LAB, and saliva measurements are made by simply placing the strip on the tip of the tongue.
The LAB can be used with or without Bluetooth or Internet access. Measurements can be taken anytime for immediate readings, and then stored for later upload.
- Size 8.4 x 1.8 x 1.0 in / 214 x 45 x 25 mm
- Weight 5.6 oz / 160 g
- FCC Compliance 15.107, 15.109 Class A
- CE Certification
- FDA Registered Osmometer
- Bluetooth version 5.1
- Battery life more than 1000 measurements when fully charged
- Type Single Cell rechargeable, Li-Po, 3.7V, 1100mAh
- Charging port USB-C
- Charging cable USB-C to USB-A 1m
* No calibration needed
- MX3 LAB Pro Version
- 120 Disposable Hydration Test Strips
- Test Strip Dispenser
- USBC Charging Cable